參數表及額定參數
明確擬供型號及資料需要覆蓋的電氣額定參數。
針對您的項目發送需求
產品圖片供參考。確認您的項目的建議配置和圖紙。
HEAKOR / 變壓器詢盤
The HEAKOR 200 kVA three-phase pole-mounted transformer is listed as an oil-immersed design for overhead distribution projects. For a project specifying 200 kVA, provide both the electrical ratings and the operating load information. The listed capacity does not establish suitability for a particular motor, process or combination of loads.
這些信息用于識別所列產品。實際供貨設備以批準的技術規格及圖紙為準。
容量·電壓·相數·頻率
用途 · 目的地 · 數量 · 計劃
規格·圖紙·所需批準
技術規格、標準、認證范圍及商務條款將針對擬供設備和項目確認。
Submit your 200 kVA project requirements for technical review and quotation.
For a 200 kVA three-phase pole-mounted transformer, confirm the following before finalizing the order:
Provide the connected loads and their expected operating pattern, including which loads run together. Identify motor-starting arrangements and any special equipment requirements. A capacity label alone is insufficient for engineering selection.
Describe the existing load and the planned additions separately, with their expected timing and operating conditions. Request review of the complete design requirement rather than assuming a fixed spare-capacity percentage is suitable.
Confirm primary and secondary voltages, frequency, winding connection, neutral requirements and impedance. Include insulation levels, taps and protection requirements from the project specification. Mark values still under review as TBC.
No. Compliance and approval must be established for the exact proposed design and destination. Identify mandatory certificates, test documentation and utility requirements at the enquiry stage; none should be assumed from the capacity or product category.
Send HEAKOR your company name, project stage, quantity, destination and requested delivery schedule with the technical requirements. Final configuration, documents, tests, price and delivery need written confirmation.
Request a 200 kVA transformer quotation. For the family overview, see three-phase pole-mounted transformers.
申請報價之前
產品名稱或容量只是起點。提供這些要求,以便根據項目審核方案。
容量、一次及二次電壓、相數、頻率,以及規定的聯結方式、阻抗或分接要求。
提供安裝方式、連接要求及供電電力公司的技術規范,并說明現場限制。
說明所需的圖紙、測試或批準、數量、目的地和項目進度表。在報價前確定任何強制性要求。
提供您已有的信息,將未知事項標注為待確認。設備更換時,現有銘牌、設備照片及現場限制有助于明確核對內容。最終額定參數及供貨范圍必須在報價和批準文件中達成一致。
項目文件
告訴我們項目需要哪些資料。資料可提供性及適用范圍將針對擬供型號和配置確認。
明確擬供型號及資料需要覆蓋的電氣額定參數。
針對您的項目發送需求說明您需要檢查的安裝、電纜入口和間隙要求。
針對您的項目發送需求列出所需的測試、標準或批準,以及相關的型號或配置。
針對您的項目發送需求您的項目/下一步
發送您所掌握的詳細信息。我們可以在確認其余要求的同時開始對話。
討論您的項目