50 kVA Three-Phase Pole-Mounted Transformer

The HEAKOR 50 kVA three-phase pole-mounted transformer is listed as an oil-immersed design for outdoor overhead distribution enquiries. This page identifies the 50 kVA, three-phase product and the information needed to review a proposed configuration. Final suitability depends on the project load, electrical system, utility requirements and installation conditions.

列出的产品信息

产品类型: 柱上安装式
已列容量: 50 kVA
相数: 三相

这些信息用于识别所列产品。实际供货设备以批准的技术规格及图纸为准。

根据项目要求报价

索取项目报价阅读产品信息打开资料中心

电气

容量·电压·相数·频率

项目

用途 · 目的地 · 数量 · 计划

文件

规格·图纸·所需批准

技术规格、标准、认证范围及商务条款将针对拟供设备和项目确认。

Request a 50 kVA three-phase transformer quotation with your voltages, quantity and destination.

50 kVA Three-Phase Pole-Mounted Transformer: Specification Checklist

Listed configuration: 50 kVA, three-phase, oil-immersed, pole-mounted.
Electrical system: primary and secondary voltages, frequency, vector group and neutral requirements.
Design requirements: insulation level or BIL, tap range, impedance and specified losses or efficiency limits.
Installation: support and mounting arrangement, site conditions, ambient temperature and altitude.
Supply scope: bushings, terminals, protection devices, accessories, required tests and documents.

The checklist identifies requirements to confirm; it does not establish fixed values or included options. Specify the applicable standard, edition and utility requirements for the destination. Any certification or approval must be checked for the exact proposed design.

Separating 50 kVA single-phase and three-phase enquiries

For this listing, specify 50 kVA three-phase in your RFQ. A single-phase unit at the same capacity is a different enquiry. Provide the required voltage ratio, frequency, vector group and neutral arrangement so the proposed configuration can be reviewed without ambiguity.

Buyer Questions

What information is needed for a replacement?

Mention the existing nameplate, connection diagram, impedance requirement and installation drawing. Identify changes to the load, protection or support arrangement. Equal kVA ratings alone do not establish that two transformers are interchangeable.

How are price and delivery confirmed?

Send your company name, project stage, quantity, destination and requested delivery date with the technical requirements. Mention available specifications, drawings or nameplate records so HEAKOR can arrange how to receive them. Final configuration, documents, tests, price and delivery require confirmation in the agreed quotation.

Discuss Your 50 kVA Project with HEAKOR

Use the enquiry form to share the requirements you have and mark open values as TBC. Identify any mandatory documents or approval steps before requesting a firm offer.

Submit Your Project Requirements. For the family overview, browse three-phase pole-mounted transformers.

申请报价之前