参数表及额定参数
明确拟供型号及资料需要覆盖的电气额定参数。
针对您的项目发送需求
产品图片供参考。确认您的项目的建议配置和图纸。
HEAKOR / 变压器询盘
The HEAKOR 200 kVA three-phase pole-mounted transformer is listed as an oil-immersed design for overhead distribution projects. For a project specifying 200 kVA, provide both the electrical ratings and the operating load information. The listed capacity does not establish suitability for a particular motor, process or combination of loads.
这些信息用于识别所列产品。实际供货设备以批准的技术规格及图纸为准。
容量·电压·相数·频率
用途 · 目的地 · 数量 · 计划
规格·图纸·所需批准
技术规格、标准、认证范围及商务条款将针对拟供设备和项目确认。
Submit your 200 kVA project requirements for technical review and quotation.
For a 200 kVA three-phase pole-mounted transformer, confirm the following before finalizing the order:
Provide the connected loads and their expected operating pattern, including which loads run together. Identify motor-starting arrangements and any special equipment requirements. A capacity label alone is insufficient for engineering selection.
Describe the existing load and the planned additions separately, with their expected timing and operating conditions. Request review of the complete design requirement rather than assuming a fixed spare-capacity percentage is suitable.
Confirm primary and secondary voltages, frequency, winding connection, neutral requirements and impedance. Include insulation levels, taps and protection requirements from the project specification. Mark values still under review as TBC.
No. Compliance and approval must be established for the exact proposed design and destination. Identify mandatory certificates, test documentation and utility requirements at the enquiry stage; none should be assumed from the capacity or product category.
Send HEAKOR your company name, project stage, quantity, destination and requested delivery schedule with the technical requirements. Final configuration, documents, tests, price and delivery need written confirmation.
Request a 200 kVA transformer quotation. For the family overview, see three-phase pole-mounted transformers.
申请报价之前
产品名称或容量只是起点。提供这些要求,以便根据项目审核方案。
容量、一次及二次电压、相数、频率,以及规定的联结方式、阻抗或分接要求。
提供安装方式、连接要求及供电电力公司的技术规范,并说明现场限制。
说明所需的图纸、测试或批准、数量、目的地和项目进度表。在报价前确定任何强制性要求。
提供您已有的信息,将未知事项标注为待确认。设备更换时,现有铭牌、设备照片及现场限制有助于明确核对内容。最终额定参数及供货范围必须在报价和批准文件中达成一致。
项目文件
告诉我们项目需要哪些资料。资料可提供性及适用范围将针对拟供型号和配置确认。
明确拟供型号及资料需要覆盖的电气额定参数。
针对您的项目发送需求说明您需要检查的安装、电缆入口和间隙要求。
针对您的项目发送需求列出所需的测试、标准或批准,以及相关的型号或配置。
针对您的项目发送需求您的项目/下一步
发送您所掌握的详细信息。我们可以在确认其余要求的同时开始对话。
讨论您的项目