参数表及额定参数
明确拟供型号及资料需要覆盖的电气额定参数。
针对您的项目发送需求
产品图片供参考。确认您的项目的建议配置和图纸。
HEAKOR / 变压器询盘
The HEAKOR 150 kVA three-phase pole-mounted transformer is listed as an oil-immersed design for overhead distribution projects. When preparing a 150 kVA enquiry, specify the connection requirements and the equipment included in supply. A clear list of terminals, protection, accessories and documents helps avoid differences between the quotation and the installation requirement.
这些信息用于识别所列产品。实际供货设备以批准的技术规格及图纸为准。
容量·电压·相数·频率
用途 · 目的地 · 数量 · 计划
规格·图纸·所需批准
技术规格、标准、认证范围及商务条款将针对拟供设备和项目确认。
Submit your 150 kVA project requirements for technical review and quotation.
For a 150 kVA three-phase pole-mounted transformer, confirm the following before finalizing the order:
Do not assume that every required item is included. List the protection, monitoring, terminals and other accessories required by the project. Ask the quotation to identify included items, exclusions and responsibilities.
Identify the general arrangement, mounting dimensions and terminal details needed for approval. Include any required wiring or accessory documentation. The drawing scope and approval process should be agreed with the technical specification.
These are useful starting points, but frequency, phase connection, impedance, insulation requirements and installation details also need confirmation. Supply the utility specification or single-line diagram where available and identify unresolved requirements.
No. Compliance and approval must be established for the exact proposed design and destination. Identify mandatory certificates, test documentation and utility requirements at the enquiry stage; none should be assumed from the capacity or product category.
Send HEAKOR your company name, project stage, quantity, destination and requested delivery schedule with the technical requirements. Final configuration, documents, tests, price and delivery need written confirmation.
Request a 150 kVA transformer quotation. For the family overview, see three-phase pole-mounted transformers.
申请报价之前
产品名称或容量只是起点。提供这些要求,以便根据项目审核方案。
容量、一次及二次电压、相数、频率,以及规定的联结方式、阻抗或分接要求。
提供安装方式、连接要求及供电电力公司的技术规范,并说明现场限制。
说明所需的图纸、测试或批准、数量、目的地和项目进度表。在报价前确定任何强制性要求。
提供您已有的信息,将未知事项标注为待确认。设备更换时,现有铭牌、设备照片及现场限制有助于明确核对内容。最终额定参数及供货范围必须在报价和批准文件中达成一致。
项目文件
告诉我们项目需要哪些资料。资料可提供性及适用范围将针对拟供型号和配置确认。
明确拟供型号及资料需要覆盖的电气额定参数。
针对您的项目发送需求说明您需要检查的安装、电缆入口和间隙要求。
针对您的项目发送需求列出所需的测试、标准或批准,以及相关的型号或配置。
针对您的项目发送需求您的项目/下一步
发送您所掌握的详细信息。我们可以在确认其余要求的同时开始对话。
讨论您的项目