İçeriğe atla
HEAKOR.
TR

Seçiminiz önceliklidir. İstediğiniz zaman değiştirebilirsiniz.

Bazı ürün ve teknik içerik İngilizce olarak mevcuttur.

Fiyat teklifi isteyin

HEAKOR / Transformatör sorguları

30 kVA Three-Phase Pole-Mounted Transformer

The HEAKOR 30 kVA three-phase pole-mounted transformer is listed as an oil-immersed design for outdoor overhead distribution enquiries. This page identifies the 30 kVA, three-phase product and the information needed to review a proposed configuration. Final suitability depends on the project load, electrical system, utility requirements and installation conditions.

Listelenen ürün bilgileri

Ürün türü
Direğe monte
Listelenen anma gücü
30 kVA
Faz sayısı
Üç fazlı

Bu ayrıntılar listelenen ürünü tanımlar. Onaylanan spesifikasyon ve çizim, tedarik edilen ekipmanı tanımlar.

Proje gereksinimlerine dayalı teklif
Proje teklifi isteyinÜrün bilgilerini okuyunBelge merkezini açın
Elektrik

anma gücü · gerilimler · faz · frekans

Projesi

Uygulama · hedef · miktar · program

Belgeler

Şartname · çizimler · gerekli onaylar

Spesifikasyonlar, standartlar, sertifikasyon kapsamı ve ticari koşullar, önerilen ekipman ve proje için teyit edilir.

Request a 30 kVA three-phase transformer quotation with your voltages, quantity and destination.

30 kVA Three-Phase Pole-Mounted Transformer: Specification Checklist

  • Listed configuration: 30 kVA, three-phase, oil-immersed, pole-mounted.
  • Electrical system: primary and secondary voltages, frequency, vector group and neutral requirements.
  • Design requirements: insulation level or BIL, tap range, impedance and specified losses or efficiency limits.
  • Installation: support and mounting arrangement, site conditions, ambient temperature and altitude.
  • Supply scope: bushings, terminals, protection devices, accessories, required tests and documents.

The checklist identifies requirements to confirm; it does not establish fixed values or included options. Specify the applicable standard, edition and utility requirements for the destination. Any certification or approval must be checked for the exact proposed design.

Defining the 30 kVA three-phase supply scope

For a 30 kVA three-phase enquiry, state the required equipment arrangement and include the project single-line diagram where available. Identify winding connections, neutral requirements and installation interfaces. This makes the enquiry easier to compare with the intended distribution design.

Buyer Questions

What if the vector group is not yet specified?

Mark the vector group as TBC and identify who will approve the system connections. Provide the utility or project specification and any existing equipment details. Do not select a connection arrangement solely from a product photograph or capacity label.

How are price and delivery confirmed?

Send your company name, project stage, quantity, destination and requested delivery date with the technical requirements. Mention available specifications, drawings or nameplate records so HEAKOR can arrange how to receive them. Final configuration, documents, tests, price and delivery require confirmation in the agreed quotation.

Discuss Your 30 kVA Project with HEAKOR

Use the enquiry form to share the requirements you have and mark open values as TBC. Identify any mandatory documents or approval steps before requesting a firm offer.

Submit Your Project Requirements. For the family overview, browse three-phase pole-mounted transformers.

Teklif istemeden önce

Projenize uygunluğu onaylayın.

Bir ürün adı veya anma gücü başlangıç noktasıdır. Teklifin projenize göre incelenebilmesi için bu gereksinimleri ekleyin.

01

Elektrik gereksinimleri

Güç, primer ve sekonder gerilimler, faz sayısı, frekans ve belirtilen bağlantı, empedans veya kademe gereksinimleri.

02

Kurulum gereksinimleri

Montaj düzenlemesini, bağlantı gerekliliklerini ve hizmet veren elektrik şebekesi operatörünün özelliklerini sağlayın. Site kısıtlamalarını dahil edin.

03

Belgeler ve tedarik kapsamı

Gerekli çizimleri, testleri veya onayları, miktarı, hedefi ve proje programını belirtin. Teklif vermeden önce zorunlu gereksinimleri belirleyin.

Bazı özellikler henüz bilinmiyorsa ne olur?

Elinizdeki bilgileri gönderin ve bilinmeyen öğeleri onaylanacak şekilde işaretleyin. Değiştirme için mevcut bir isim plakası, ekipman fotoğrafları ve saha kısıtlamaları incelemenin tanımlanmasına yardımcı olur. Nihai anma elektrik değerleri ve tedarik kapsamı, teklifte ve onaylanmış belgelerde kararlaştırılmalıdır.

Bu ürünü tartışın

Proje belgeleri

Doğru belge. Doğru model için.

Projenizin ihtiyaç duyduğu belgeleri belirtin. Mevcudiyet ve geçerli kapsam, önerilen model ve konfigürasyon için teyit edilir.

01 / BELGE

Veri sayfası ve anma değerleri

Önerilen modeli ve belgenin kapsaması gereken elektriksel anma elektrik değerlerini tanımlayın.

Projeniz için istek
02 / BELGE

Genel ölçü ve bağlantı çizimleri

Kontrol etmeniz gereken kurulum, kablo girişi ve açıklık gereksinimlerini belirtin.

Projeniz için istek
03 / BELGE

Test ve onay belgeleri

Gerekli testleri, standardı veya onayı ve ilgili modeli veya konfigürasyonu belirtin.

Projeniz için istek

Önerilen konfigürasyonunuz için doküman isteyin

Modeli veya ürün tipini, anma gücü, voltajları, frekansı ve hedefi ekleyin. Belgelerin önerilen konfigürasyonla eşleştiğini kontrol edebilmek için rapor numarasını, tarihini ve test kapsamını isteyin. Bireysel bir rapor her model veya hedef için sertifikasyon sağlamaz.

Bir belgeyi incelerken tüzel kişiliği, modeli, anma elektrik değerini, geçerli kapsamı ve yayın tarihini önerilen ekipmanınızla eşleştirin.

Sertifika kapsamı kılavuzunu okuyunBelge merkezini açın

Projeniz / sonraki adım

İyi kararlar net gerekliliklerle başlar.

Elinizdeki ayrıntıları gönderin. Kalan gereksinimler onaylanırken konuşmaya başlayabiliriz.

Projenizi tartışın